The unit is intended for mechanical purification, degassing, thermovacuum drying (dewatering), as well as for leaktight storage, transportation and pressurized pouring of oil in various facilities (both hermetic and
The unit is used for purification of turbine-, industrial and compressor oils.
Technical data
Capacity (hydraulic-adjustable)*, m3/h
|
0…10
|
Oil characteristics after 1 passage through the unit (given an initial gas volume fraction not more than 10% and moisture weight fraction of not more than 35 g/MT)
|
|
Moisture reduction ratio
|
1.6
|
Gas fraction reduction ratio
|
6
|
Breakdown voltage, rise by, kV
|
10
|
Treated oil characteristics
|
|
Moisture weight fraction ,g/MT
|
10
|
Gas weight fraction, %
|
0.5
|
Filtering rating, mcm
|
|
|
|
Vacuum hydraulic tank volume, L
|
220
|
Maximum residual pressure of vacuum pump, torr / capacity (m3/h)
|
2 / 60
|
Degassing tank pressure (at full capacity), torr (mm merc) min.
|
15…25
|
Outlet oil pressure, kg/cm2
|
|
Liquid elevation, m
|
|
Suction lift for oil, m
|
6
|
Heater capacity (can be decreased at a customer’s request), kW
|
|
Three-phase 50 Hz mains voltage, W
|
380
|
Overall unit wattage, kW
|
100
|
Operating temperature range, oC
|
0…+40
|
Sizes, mm
|
1500?1300 ?2000
|
Unit weight (
|
1000
|
* in the «automated continuous» mode